Deleting A Service Template - IBM WorkPad c3 Handbook

Send User ID
Send
Password
Delay
Get IP
Prompt
End
4. Repeat steps 2 and 3 until the login script is complete.
5. Tap OK.

Deleting a service template

There is only one way to delete a service template: use the Delete
command from the Service menu.
To delete a service template:
1. Tap the Service pick list.
2. Tap the service template you want to delete.
3. Tap the Menu icon
4. Tap Service, and then tap Delete.
5. Tap OK.
Page 170
Transmits the User ID information entered
in the User ID field of the Network
Preferences screen.
Transmits the password entered in the
Password field of the Network Preferences
screen. If you did not enter a password,
this command prompts you to enter one.
The Password command is usually
followed by a Send CR command.
Tells your companion to wait a specific
number of seconds before executing the
next command in the login script.
Reads an IP address and uses it as the IP
address for your companion. This
command is used with SLIP connections.
Opens a dialog box and prompts you to
enter text of some kind (for example, a
password or a security code).
Identifies the last line in the login script.
.
Setting Preferences for Your Companion