IBM WorkPad Workpad Handbook page 101

2. Enter a description of the event. You can enter up to 255 characters.
3. If the event is one hour long, skip to step 5. If the event is longer or
shorter than an hour, tap the time of the event to open the Set Time
dialog box.
Tip: You can also open the Set Time dialog (to select a start
time) by making sure no event is selected, and then
writing a number on the number side of the Graffiti
writing area.
4. Do one of the following:
Tap the time columns on the right side of the Set Time dialog to set
the Start Time, then tap the End Time box and tap the time columns
to set the End Time.
Tap All Day to automatically insert the start and end time of the
event as defined in your Date Book preferences.
Chapter 5
Tap a
time line
Time bar
shows
duration
Tap the
time of
an event
Enter event
Page 91