Clearing Jams - Ricoh InfoPrint 1650 User Manual

Message
23x Paper Jam Check Duplex
24x Paper Jam Check Tray <x>
250 Paper Jam Check MP Feeder
260 Paper Jam Check Env Feeder
290, 291, 292, and 294 Scanner
Jams

Clearing jams

Paper jams can occur in three areas: the front of the MFP, inside the MFP, and at the rear of the MFP.
Jams in the front of the MFP occur in the input options or the duplex tray. Jams inside the MFP occur
in two locations and require the removal of the print cartridge. Jams can also occur at the rear of the
MFP or duplex unit.
Note: The following clearing jam instructions may seem out of numerical sequence.
However, they have been grouped to help you quickly clear the print path. To go to
a specific jam, see
250 Paper Jam Check MP Feeder
1
Remove the paper from the multipurpose feeder.
2
Flex, fan, and restack the media, and place it into the multipurpose feeder.
3
Load the print media.
4
Slide the side guide toward the inside of the tray until it lightly rests against the edge of the
media.
What to do*
Remove the duplex tray from the duplex unit, raise the duplex
deflector, and remove the jam. Open the rear duplex door, and
remove the jam.
Open each tray, and remove any jammed media.
Remove all media from the multipurpose feeder, flex and stack the
media, reload the multipurpose feeder, and adjust the guide.
Lift the envelope weight, remove all envelopes, flex and stack the
envelopes, reload the envelope feeder, and adjust the guide.
Remove all original documents from the ADF. Open the ADF cover,
and remove any jammed pages. Open the document cover, and
remove any jammed pages. Open the scan unit access door, and
remove any jammed pages.
Understanding jam
142
messages.