Fn Key Combinations - IBM TransNote Hardware Maintenance Manual

FRU
Hard-disk
drive
Diskette drive 1. Interactive Tests -->
CD-ROM or
DVD drive
Memory
Fan
FlipTouch
display
ThinkScribe
digital
notepad

Fn key combinations

The following table shows the function of each combination
of Fn with a function key. The Fn key works independently
from the operating system.
Key
combination
Fn + F3
Fn + F4
(continued)
Applicable test
Diagnostics --> Fixed Disks
CD-ROM/DVDDiskette Drives
2. Interactive Tests --> Diskette
Interactive Tests --> CD-ROM/DVD
1. Run Memory Test - Quick.
2. If the test does not detect the error,
run Diagnostics --> Memory Test -
Full.
1. Turn on the computer and check the
air turbulence at the louver of the rear
side.
2. Run Diagnostics --> Other Devices
--> IBM Fan.
See "Identifying problems with the
FlipTouch display" on page 47.
See "Identifying problems with the
ThinkScribe digital notepad" on page 47.
Description
Turn off the computer display, leaving
the screen blank. To turn the computer
display on again, press any key or the
TrackPoint pointer. Also the computer
display is turned on if the ac adapter is
attached to or detached from the
computer.
Put the computer in standby mode. To
return to normal operation, press the Fn
key.
Note: In Windows 2000, this
combination of buttons functions as a
sleep button. Customer can change the
settings so that pressing it puts the
computer into hibernation mode or even
shuts the computer down.
Product overview
ThinkPad TransNote
39