Error Messages - IBM TransNote Hardware Maintenance Manual

Ibm transnote: hardware guide
Hide thumbs Also See for TransNote:
Table of Contents

Advertisement

Error messages

Symptom or error
Device address conflict.
Allocation error for device.
Failing bits: nnnn.
Invalid system configuration
data.
I/O device IRQ conflict.
Operating system not found.
Hibernation error.
Fan error.
44
ThinkPad TransNote
Symptom-to-FRU index
FRU or action, in sequence
1. Load Setup Defaults in
IBM BIOS Setup Utility.
2. Backup battery.
3. System board.
1. Load Setup Defaults in
IBM BIOS Setup Utility.
2. Backup battery.
3. System board.
1. DIMM.
2. System board.
1. DIMM.
2. System board.
1. Load Setup Defaults in
IBM BIOS Setup Utility.
2. Backup battery.
3. System board.
1. Check that the operating
system has no failure and
is installed correctly.
2. Enter IBM BIOS Setup
Utility and see whether the
hard-disk drive and the
diskette drive are properly
identified.
3. Reseat the hard-disk drive.
4. Reinstall the operating
system.
5. If the diskette drive is
connected and the
operating system is located
on/in the drive, replace the
diskette drive.
6. Hard-disk drive.
7. System board.
1. Restore the system
configuration to what it
was before the computer
entered hibernation mode.
2. If memory size has been
changed, re-create the
hibernation file.
Fan.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkpad transnoteMt 2675

Table of Contents