IBM TransNote Hardware Maintenance Manual page 31

3. Select Diagnostics with the arrow keys, and press
Enter.
A pull-down menu appears. (Its exact form depends on
the model.) The options on the test menu are as
follows:
Diagnostics
v Run Normal Test
v Run Quick Test
v CPU/Coprocessor
v Systemboard
v Video Adapter
v Serial Ports
v Parallel Ports
v Fixed Disks
v Diskette Drives
v Other Devices
v Memory Test – Full
v Memory Test – Quick
v FlipTouch Display
v ThinkScribe
Notes:
v In the Keyboard test in Interactive Tests, the Fn key is
scanned only once. Each key should be held down for at least
2 seconds; otherwise, it cannot be sensed.
v Sound Card is not recognized in the Stereo Speaker in the
Interactive Tests. To test it, use the audio device test in the
Other Devices (Diagnostics).
v Video Adapter test supports only the LCD display on ThinkPad
TransNote. Before running PC-Doctor DOS, detach the
external monitor.
4. Run the applicable function test.
5. Follow the instructions on the screen. If there is a
problem, PC-Doctor shows messages describing it.
6. To exit the test, select Quit — Exit Diag.
To cancel the test, press Esc.
Notes:
1. After executing PC-Doctor, check the system time/date
and reset them if needed.
Interactive Tests
v Keyboard
v Video
v Internal Speaker
v Mouse
v Joystick Test
v Diskette
v System Load
v CD-ROM/DVD Test
v Stereo Speaker
v ThinkScribe LCD Test
v ThinkScribe LED Test
v ThinkScribe Interactive Test
v FlipTouch Display
General descriptions
Checkout guide
27