Table of Contents
Advertisement
Opening the door during a power failure
Do not attempt to do this if the water level in the washer is above the bottom of the door.
If there is a power failure during a wash cycle your washer will stop and the door will
remain locked.
1
2
3
When power is restored, your washer will resume the interrupted wash cycle. If the cycle
doesn't resume automatically, simply press
8
SAFETY FEATURES
Locate the pump filter cover at the bottom
right of your washer.
Place a coin or key in the slot and tilt it
upwards to lever the cover open.
Pull the door release tab down from the ring.
Use a screwdriver tip, pen or key to get a
good grip.
POWER
to restart your washer.
Advertisement
Table of Contents
