Getting started quickly
50
AeroCare DE7027P, DG7027P
Ensure the lint filter has been cleaned before each drying cycle. Check the lint filter has been
■ ■
replaced correctly in its housing before using your dryer.
Sort and load items into the dryer drum. Ensure that no items are caught in the way of the door,
■ ■
then close the door. Check the door is fully closed before starting the dryer.
Important!
Ensure there is plenty of room for the garments to tumble freely while drying – do not overload
your dryer. Load in terms of the space clothes take up when dry rather than when they are wet.
Press POWER to activate your dryer.
1
Your dryer will default to the REGULAR cycle. Select your desired drying cycle by turning the
2
SmartTouch™ Control Dial.
Select your preferred drying options (if you wish to select different options from the default options
3
programmed for the cycle) using the SmartTouch™ buttons on the right hand side of the panel.
Touch the START/PAUSE button to start the drying cycle.
4
Fig.45 AeroCare control panel (DE7027P, DG7027P)
Note: the control panel may differ depending on what model of dryer you have.
1
2