Hongqi HS7 Manual page 282

6-1..Using.the.A/C.System
Manual regulation
■ Regulation of air volume
Method.1:.Click.the.air.flow.setting.button.
adjust.the.air.flow.at.Level.1-7.
■ Temperature regulation
Click."Temperature.Down".(<).or."Temperature.Up".(>).button.on.the.temperature.
setting.button.to.set.the.temperature.
Driver side and front passenger side temperatures can be adjusted
independently.
If. the. [A/C]. button. indicator. does. not. lamp. up. or. the. [A/C]. button. indicator. is.
on but the A/C compressor is not running, the system will blow atmospheric
temperature.air.or.heated.air.to.the.interior.
■ Switch the temperature zone control mode
280
Method. 1:. Operate. the. air. flow. setting.
button on the screen to adjust the air
flow.at.Level.1-7.
on the central control panel to
By. tapping. the. [SYNC]. button,. the.
indicator lights up, it goes to the single-
zone control mode, and the temperature
at the front passenger side and rear
seats will be synchronized with that at
the.driver's.side.
By. tapping. the. [SYNC]. button. again,.
the indicator goes out, it goes to the
three-zone control mode, and you can
independently set the temperatures at
the driver's side, the front passenger side
and.rear.seats.
In. the. single-zone. control. mode,.
separately set the temperature at the
front passenger side or rear seats, it
goes.to.the.three-zone.control.mode.