4-5..Using.Other.Driving.Systems
■
Adjusting the vehicle speed
■
Setting the headway
150
. I ncreasing.the.speed
Short.pushing:.Pushing.the.lever.once.
increases the speed by 5 km/h;
L o n g . p u s h i n g : . A f t e r . t h e . s y s t e m.
confirms.the.long.pushing.is.valid,.the.
speed.continues.to.increase.by.1.km/h.
Decreasing the speed
Short.pushing:.Pushing.the.lever.once.
decreases the speed by 5 km/h;
Long.pushing:.After.the.system.
confirms.the.long.pushing.is.valid,.the.
speed continues to decrease by 1 km/
h.
Note:.If.the.currently.set.vehicle.speed.
does not meet the multiple of
5 in the case of short pushing,
the speed will automatically
become a multiple of 5 first
when.adjusting.
Set the distance to the front vehicle
If. pulling. the. cruise. control. handle.
backward.to."HEADWAY".position,.the.
distance to the front vehicle can be
set.
There are four distance modes in the
system, which can be switched by
pulling the control handle in the order
of.4-3-2-1-4.
The set cruise speed
ACC indicator lamp
Gray:. The. system. is. in. standby. and.
cannot.meet.the.set.conditions.
W h i t e : . s y s t e m . e n a b l e d , . s e t t i n g.
conditions.met,.cruise.can.be.set.
Green:.system.working,.in.cruise.state.
The set headway
The.default.headway.is."Distance.4".