Hongqi HS7 Manual page 158

4-5..Using.Other.Driving.Systems
■ Adjusting the vehicle speed
■ Setting the headway
156
. I ncreasing.the.speed
Short.pushing:.Pushing.the.lever.once.
increases the speed by 5 km/h;
L o n g . p u s h i n g : . A f t e r . t h e . s y s t e m.
confirms.the.long.pushing.is.valid,.the.
speed.continues.to.increase.by.1.km/h.
Decreasing the speed
Short.pushing:.Pushing.the.lever.once.
decreases the speed by 5 km/h;
L o n g . p u s h i n g : . A f t e r . t h e . s y s t e m.
confirms.the.long.pushing.is.valid,.the.
speed continues to decrease by 1 km/
h.
Note:..If.the.currently.set.vehicle.speed.
does not meet the multiple of 5
in the case of short pushing, the
speed will automatically become a
multiple.of.5.first.when.adjusting.
Set the distance to the front vehicle
If. pulling. the. cruise. control. handle.
backward.to."HEADWAY".position,.the.
distance to the front vehicle can be
set.
There are four distance modes in the
system, which can be cycled by pulling
the control handle in the order of 4-3-
2-1-4.
The set cruise speed
SACC indicator lamp
(Gray) (Gray):. The. system. is.
in standby and cannot meet the set
conditions.
(Gray) (white):. The. system. is.
turned.on.for.the.adaptive.cruise.settings.
(White) (White):. The. system.
is turned on for the advanced cruise
settings.
(Gray) (green):.The.system.will.be.
operated and enter the adaptive cruise
status
(Green) (green):.The.system.will.be.
operated and enter the adaptive cruise
status.for.the.advanced.cruise.settings.
. (Green). (Green):. system. working,. in.
cruise.state.
The set headway
The.default.headway.is."Distance.4".