Hongqi HS7 Manual page 135

■ Operating conditions
Conditions.for.activating.the.Auto.Hold:
● Close.all.doors.
● Driver.wears.the.belt.
● Start.the.vehicle.and.press.the.Auto.Hold.
● Driver depresses the brake pedal until the vehicle is stopped, and then releases
the.brake.pedal.
CAUTIONS
■When parking on slippery road surfaces
If.the.tire.grip.ability.is.exceeded,.AUTO.HOLD.function.cannot.stop.the.vehicle..Do.
not.use.this.system.on.the.slippery.road.surface.
NOTICES
■When parking
AUTO.HOLD.cannot.be.used.for.the.long.time.parking..To.park.for.long.time,.apply.
EPB..In.AUTO.HOLD,.if.the.engine.switch.is.turned.to.IG.-.OFF,.the.brake.will.be.
released.and.the.vehicle.may.move..To.shut.down.the.engine.switch,.depress.the.
brake.pedal,.apply.EPB.and.shift.the.gear.to.P.
4-2..Driving.Specifications
133
4