Hongqi HS7 Manual page 159

Canceling the super cruise control
■ SACC and ACC switch setting
● When ACC is operated and meets SACC setting conditions, if pulling the cruise
control. handle. backward. to. "HEADWAY". position,. it. can. be. switched. to. SACC.
mode.
● When.SACC.is.operated,.if.pulling.the.cruise.handle.back.to."HEADWAY".position,.
it.will.be.switched.to.ACC.mode.
● When SACC is operated, the driver can operate the steering wheel or the turn
signal switch to automatically switch it to ACC mode; at this time, the steering
wheel.icon.will.flash..When.the.system.determines.that.SACC.setting.conditions.
are met within a period of time, the system will be automatically switched to SACC
mode.
● When SACC is operated, the camera cannot recognize the front lane lines, it will
be automatically switched to ACC mode; at this time, the steering wheel icon will
flash.. When. the. system. judges. that. SACC. setting. conditions. are. met. within. a.
certain.period.of.time,.it.will.automatically.be.switched.to.SACC.mode.
● With SACC working, if the vehicle is running through a sharp turn, it will
automatically.switch.to.ACC.mode.
● When SACC is operated, when the system judges that the driver hands are
away from the steering wheel for more than a certain period of time, it will be
automatically switched to ACC mode after leaving; during this process, the system
will.sent.the.alarm.information.in.stages.
● With SACC working, if the camera detects the lane is too wide or too narrow, it will
automatically.switch.to.ACC.mode.
Noise upon SACC cruise
■
It. is. normal. that. noise. will. be. generated. when. the. SACC. is. applying. automatic.
deceleration.
Headway
■
The.default.headway.is."Distance.4".
4-5..Using.Other.Driving.Systems
Depress the brake pedal or push the
cruise control handle forward to the
"CANCEL". position. and. release. it. to.
cancel.the.cruise.control.
4
157