Hongqi HS7 Manual page 190

4-5..Using.Other.Driving.Systems
NOTICES
■Be sure to prevent the rear bumper from being clashed when parking.
Otherwise, the sensor in the bumper may be displaced or damaged, and
thus cause the SWA to be automatically shut down or the SWA function to be
affected.
■To ensure normal operation of the SWA, the sensor in the bumper should be
clean, free of ice and snow, and not be covered by other objects.
■Coat the rear bumper only with the paint approved by FAW. When other
coating types may cause the lane change assist system function is limited or
the system is faulty.
■If it is not working properly, deactivate the SWA immediately and contact your
FAW authorized Hongqi dealer for repair.
■The repaired SWA needs to be calibrated. For the details, contact your FAW
authorized Hongqi dealer.
■The SWA will not respond to the pedestrians, animals, bicycles and others in
blind spots.
■The SWA only serves as an auxiliary reminder. It cannot completely avoid
collisions in the blind spots. Before changing the lane, be sure to observe the
rear-view mirrors, scan backwards and turn on the turn signals.
■Special operating conditions, such as dark and damp weather and high
speeds, may cause the SWA to give false alarm or to miss alarm. This is a
normal phenomenon.
■When the blind spot detection sensor behind the vehicle is blocked, the SWA
will not work. Clear the sensor in time.
■The SWA is limited by the physical laws and system conditions and may not
be able to correctly identify traffic conditions under some driving conditions.
Such as the following conditions:
●In.a.lane.with.sharp.turn.
●In.a.lane.with.different.width.
●On.a.mountain.road.with.ups.and.downs.
●In.bad.weather.
●At some special structures on the roadside, such as high or offset highway
guardrails.
188