Wiring - Nambuk NRD-1000 Product Manual

Operating Manual
NRD-1000

5-2. Wiring

Connect Electric Power
terminals. After power on, press "NO"switch in
front of machine, and Pilot Lamp will be lighted
up. In case of not being lighted up, two lines
among three lines of power source should be
exchanged.
☆ Be sure to ground the Earth.
5-3. Product Installation
This machine is able to demonstrate its capability if enough installation space is secured on
the solid ground for convenient work and maintenance.
For the foundation, please increase or decrease the thickness of the concrete according to the
ground in order to prevent sinking or generating cracks due to the weight of the machine and
processed object. For the installation area, please avoid direct sunlight and install without
any vibration.
The foundation shall be accompanied by the following basic drawing.
18 Nambuk Co.,Ltd
source, R.S.T to
Power Source
Terminal
no fuse braker
leveling plate