Operating Manual
NRD-1000
6-5. Column & Arm Clamp
In moving column and Arm clamp lever right of
point middle, and It is stay in clamp and than
if turn left lever, in condition that clamp is
unbind.
★ This picture is clamping.
ARM
CLAMP LEVER
COLUMN
CLAMP LEVER
6-6 Spindle box Clamp
Arm and spindle box, if pulling spindle box
clamp lever, the condition of clamp accomplish
and if pulling lever in condition that clamp is
unbind.
SPINDLE BOX
CLAMP LEVER
22
Nambuk Co.,Ltd
6-7. Selection of Spindle Rotation
Spindle Rotation is 9 stage of speed change
48~1525rpm by spindle change lever.
6-8 Selection of Feed Speed
As feed change handle of downward, selection of
Feed Speed of speed 0.11, 0.22 and 0.33 as total
3 stage of feed speed.
★ Feed Speed is feed volume per one time
rotation of spindle
6-9 Automatic Feed of Spindle
After selecting feed speed, if you pushing and
Automatic feed of spindle to be hung, automatic
feed is made.
If you like to stop automatic feed by hand,
return Spindle Feed lever to the position of
manual feed.