Additional Resources - madVR Labs Envy Sony Setup Manual

C. While on the Envy Incoming Signal menu, press the right arrow once to access the Outgoing
Signal Information. Make sure that the "Framerate" shown here matches the "Framerate" from
the Incoming Signal Information menu (in this example, both should show 23.976).
D. If the colors look undersaturated or oversaturated, check the Envy Outgoing Signal Information
and verify that the Outgoing "Colorimetry" matches the color space you expect for the current
content being played (e.g., "BT.2020" or "BT.709"), and check the Sony menu to confirm the
projector is using that correct, corresponding color space (revisit steps 9).

Additional Resources

This concludes the Sony setup instructions. We recommend also review the Envy Introduction to Profiles
guide, and the setups guides for source devices such as Kaleidescape and Apple TV. This and other such
resources are available at www.madvrenvy.com/#downloads. Thank you and enjoy your Envy!
7
madVR Envy – Sony Setup Guide
Copyright © madVR Labs, LLC. All rights reserved.