madVR Labs Envy Sony Setup Manual page 4

4. If using a scope screen (a screen that has an aspect ratio of 1.85 or greater, such as 2.35 or 2.40
aspect ratio), please follow the instructrions in the Envy Scope Screen Setup Guide, available
from www.madvrenvy.com/#downloads.
5. ALL other settings in the various Envy Configuration Menus should be left on AUTO, unless you
have a particularly good and specific reason to change it. Often people change these settings
without understanding the fully impact. A good example is the HDR Flag setting. Some people
change this to On, thinking that would be a good thing. In almost all cases this should be left in
Auto (and Envy will not set the flag, intentionally). Note that changing the "Configuration" items
should not be confused with the changing the Envy Settings Menu (the Envy remote control
button with the 3 sliders on it) - those are there for you to change to suit your tastes.
6. In the Sony "Picture" menu, we recommend turning Reality Creation Off. Or using it lightly, such
as Resolution at 15 or lower, Noise Filtering - Off, Defocus Optimization - Off. Sharpness of 15 is
generally optimal but feel welcome to set it to taste.
7. In the Sony Cinema Black Pro menu, we recommend dynamic control set to Full (but it is OK to
use limited or off, perhaps even more "correct" to use Off, but this can be set to taste). For Laser
Light Output we recommend on Max, to maximize the brightness available for HDR. If this
causes the Sony fan to run a bit too loud, you can use a slightly lower setting for max without
impacting the brightness much, while quieting the Sony fan.
4
madVR Envy – Sony Setup Guide
Copyright © madVR Labs, LLC. All rights reserved.