Replacing A Turn Signal Light Bulb; Replacing The Tail/Brake Light Bulb - Yamaha XT600E 2000 Owner's Manual

2
1. Screw
2. Lens
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
PERIODIC MAINTENANCE AND MINOR REPAIR
1
1
1. Bulb
2. Remove the defective bulb by
EAU03497
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
cC
Do not overtighten the screw, oth-
erwise the lens may break.
1. Screw (×2)
2. Lens
Replacing the tail/brake light
bulb
ECA00065
6-32
1
2
1. Remove the tail/brake light lens
by removing the screws.
1
2
3
4
EAU01623
5
6
7
8
9