Rear Wheel - Yamaha XT600E 2000 Owner's Manual

1
1. Axle nut
2. Brake caliper bracket bolt

Rear wheel

To remove the rear wheel
w
8 It is advisable to have a
Yamaha dealer service the
wheel.
8 Securely support the motorcy-
cle so that there is no danger
of it falling over.
1. Remove the axle nut.
2. Loosen the brake caliper bracket
bolt.
PERIODIC MAINTENANCE AND MINOR REPAIR
2
1. Bolt (×2)
3. Remove the bolt on each end of
EAU00963
the swingarm.
4. Lift the rear wheel off the ground
according to the procedure on
page 6-33.
EW000122
1
1
6-36
5. Push the wheel forward, and
then remove the drive chain from
the rear sprocket.
NOTE:
The drive chain does not need to be
disassembled in order to remove and
install the wheel.
6. Pull the wheel axle out, and then
remove the wheel.
cC
Do not apply the brake after the
wheel has been removed together
with the brake disc, otherwise the
brake pads will be forced shut.
1
2
4
5
6
7
8
9
ECA00048