Tools And Equipment Required - Cisco SFS 7024 Hardware User's Manual

This unit may have more than one power cord. To reduce the risk of electrical shock, disconnect both
Warning
cords before servicing the unit.
To avoid potential electrical shock, operate this unit only when the cover is in place.
Warning
Warning To avoid potential electrical shock, use only a grounded (three wire) electrical outlet.
Warning Keep objects that might damage this unit and liquids that might spill clear from this unit. Liquids and
foreign objects that come into contact with voltage points could create the risk of fire or electrical
shock.
Do not overload the power supply branch circuit providing power to the rack. The total rack load should
Caution
not exceed 80 percent of the branch circuit rating.
Caution Keep power cord and connection cables clear of obstructions that might cause damage.
Do not attempt to service the unit yourself. The first course of action is to contact Technical Support.
Caution
Note Unplug this unit from the electrical outlet and refer servicing to a qualified service center if any of the
following conditions occur:

Tools and Equipment Required

•
•
•
Cisco SFS 7024 InfiniBand Server Switch Hardware Users Guide
18
The power cord is damaged or frayed.
–
The unit has been dropped or the case has been damaged.
–
The unit has been exposed to any liquids.
–
The unit does not operate normally when all operating instructions have been followed.
–
The unit exhibits a distinct change in performance, indicating a need for service.
–
An ESD wrist strap
A #2 Phillips screwdriver
Pen (felt-tip) to mark the mounting holes
Chapter
OL-8794-04