Time Service - Cisco SFS 7024 Hardware User's Manual

Chapter
The thresholds for the following fields are set based upon the number of error message which can occur
Note
in one second. The value can be from 1 to 65,535.
portSymbolErrThresh
portLinkErrRecvThresh
portLinkDownedThresh
portRecvErrThresh
portRecvRemPhysErrThresh
portRecvSwRelayErrThresh
portXmitDiscardThresh
portPKeyViolInThresh
portPKeyViolOutThresh
portRawViolInThresh
portRawViolOutThresh
portLocalLinkIntegThresh
portExcBufferOverrunThresh

Time Service

The System Time Information screen allows the user to set the system time using either network time
protocol (NTP) or manual overrides.
OL-8794-04
The threshold for the number of times a 8B10B encoding violation, or a disparity violation was
detected on the port.
The threshold for the number of times the link error recovery process happened successfully on the
port.
The threshold for the number of times the link error recovery process failed on the port.
The threshold for the number of errors received on the port.
The threshold for the number of remote physical errors received on the port.
The threshold for the number of switch relay errors received on the port.
The threshold for the number of transmit discards received on the port.
The threshold for the number of times PKey inbound was invalid on the port.
The threshold for the number of times PKey outbound was invalid on the port.
The threshold for the number of times a raw inbound packet was discarded by the port.
The threshold for the number of times a raw outbound packet was discarded by the port.
The threshold for the number of local link integrity errors on the port.
The threshold for the number of excessive buffer overrun errors on the port.
Cisco SFS 7024 InfiniBand Server Switch Hardware Users Guide
73