Trap Control - Cisco SFS 7012 Hardware User's Manual

Trap Control

The Trap Control screen allows the user to set default trap scenarios related to configuration files.
Figure 2-51 Trap Control
Click the chassis view.
Step 1
Click Config File Admin.
Step 2
Click Trap Control. The Trap Control screen is displayed:
Step 3
Figure 2-52 Configuration File Trap Control Screen
Select or deselect the desired trap(s).
Step 4
To generate an immediate trap, click the applicable Gen Trap button.
Note
To save settings, click on Apply.
Step 5
If the checkbox is not checked the Gen Trap button will not generate a trap.
Note
Following are definitions for each configuration file trap:
•
•
•
•
•
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
2-28
CfgSrvBackupFailed
The server was instructed to backup a file for a particular slot, which failed.
CfgSrvSyncError
Synchronization to the slave CMU failed. The problem should be resolved and attempted manually.
CfgSrvGenError
A general error has occurred.
CfgSrvFileRestored
The configuration files have been restored to a particular slot.
CfgSrvFileBackedup
OL-8787-05