Cisco SFS 7012 Hardware User's Manual page 134

Sample Output:
-> smShowMasterLMC
Master SM LMC: 0 (1 LID(s) per port)
NOTES: Use this command to display the Master SM's LMC value to be used on CA ports.
smSetMasterLMC
Set the SM's LMC value to be used on CA ports.
Syntax:
smSetMasterLMC
Options:
None.
Sample Output:
-> smSetMasterLMC 1
NOTES: Use this command to set the SM's LMC value to be used on CA ports. The default is zero.
smShowMasterLid
Display the LID of the subnet manager.
Syntax:
smShowMasterLid
Options:
None.
Sample Output:
-> smShowMasterLid
The SM LID is 0x0001
NOTE: Use this command to display the SM's LID. It may be the local LID if the SM is the master.
smShowLidMap
Display the LID-to-port GUID map for the subnet manager.
Syntax:
smShowLidMap
Options:
None.
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
B-42
OL-8787-05