Table of Contents
Advertisement
After installing system components in a rack never pull more than one component at one time out of
Warning
the rack on its slide assemblies. The weight of more than one extended component could cause the
rack to tip over.
Do not step on or stand on any component when servicing other components in a rack.
Warning
Warning
The chassis, when fully populated with leaf modules, spine modules, power and fan supplies, is very
heavy (approximately 100 lbs.). It is recommended that a lifting device be used to handle a fully loaded
chassis.
Always load the rack from the bottom up, loading the heaviest item first.
Caution
Caution
Make sure the rack is level and stable before extending any component from the rack.
Ensure that proper airflow is provided to components of the rack.
Note
Protecting Against Electrostatic Discharge
Caution
Use a grounded wrist strap designed to prevent static discharge.
Static electricity can harm delicate components inside the system. To prevent ESD damage, users need
Caution
discharge any static electricity from their bodies before touching any electronic components. Touching
an unpainted metal surface will discharge static electricity.
When transporting an ESD sensitive component, first place it in an antistatic container or packaging.
Caution
Electrical Safety Precautions
Do not work alone when working with high voltage components.
Warning
This unit may have more than one power cord. To reduce the risk of electrical shock, disconnect both
Warning
cords before servicing the unit.
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
1-10
OL-8787-05
Advertisement
Table of Contents
