Table of Contents
Advertisement
Options:
None.
Sample Output:
-> userListShow
username
operator1
USERID
Bob
loginMode
Change the login authentication mode.
Syntax:
loginMode [mode]
Options:
[mode]
0-3, 0 = Username/password required, 1=username required, 2=no authentication,
3=LDAP authentication.
Sample Output:
-> loginMode 1
Mode successfully changed to: 1 = Password is not required
NOTES: This sets the authentication for the CLI. By disabling logins altogether the user is logged
in the admin account by default. There is no way to modify this default.
setldapSvrIpAddr
Modify the LDAP Server IP Address.
Syntax:
setldapSvrIpAddr [ipaddress]
Options:
[ipaddress]
The IP address of the ldap server you wish to set to authenticate in the format
"192.168.0.1"
Sample Output:
-> setldapSvrIpAddr 123.45.6.789
NOTES: This sets the LDAP server ip address. The LDAP server will be contacted for remote
authentication.
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
B-14
role
operator
admin
admin
OL-8787-05
Advertisement
Table of Contents
