Cisco SFS 7012 Hardware User's Manual page 130

NOTES: Use this command to set the sweep rate (in seconds) of the subnet manager. Valid values
are 3-86400, or 0 to turn the sweep off.
bmSetSweepRate
Syntax:
bmSetSweepRate [sweepRate}
Options:
sweepRate
Valid values are 30-86400, or 0 to turn the sweep off.
Sample Output:
-> bmSetSweepRate
NOTES: Use this command to set the sweep rate (in seconds) of the baseboard manager. Valid
values are 30-86400, or 0 to turn the sweep off.
smForceSweep
Force a fabric sweep by the embedded subnet manager.
Syntax:
smForceSweep
Options:
None.
Sample Output:
-> smForceSweep
NOTES: Use this command to force a sweep by the subnet manager.
bmForceSweep
Force a fabric sweep by the embedded baseboard manager.
Syntax:
bmForceSweep
Options:
None.
Sample Output:
-> bmForceSweep
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
B-38
Set the sweep rate of the embedded baseboard manager.
OL-8787-05