Table of Contents
Advertisement
Free Standing
1. The dryer stands on the floor and can easily be
moved into position.
2. Move the dryer into the desired position. Do not
lift the dryer by the top panel.
3. Have a minimum clearance on all sides of at
least 20mm.
4. Have a minimum clearance at the rear of
75mm. The spacers from the accessory wall
mounting kit can be used to set this distance.
5. Install the dryer on a stable and level floor.
Free Standing Venting Options
Note: the vent system should be less than two metres
long with no more than three 90⁰ bends.
Before a rear venting option is installed the dryer must
be changed from the front venting factory setup.
Remove the outlet grille from the front left-hand side and
replace with the outlet cover from the rear left-hand side.
These covers should be gently pried at the sides to
prevent damage.
https://producthelp.fisherpaykel.com/nz/Dry/Dryers/Vented/DE7060G1/User_Guide_DE7060G1/03_Installation_Instructions
External venting with kit part number PD-DK4W
External venting with kit part number PD-SVHCW4
Updated: Mon, 05 Oct 2020 18:08:12 GMT
Powered by
4
Advertisement
Table of Contents
