Supported Rmon And Rmon2 Mib Objects - Cisco Network Analysis Module 6000 Installation And Configuration Manual

Cisco systems network analysis module installation and configuration guide
Hide thumbs Also See for Network Analysis Module 6000:
Table of Contents

Advertisement

Supported RMON and RMON2 MIB Objects

Click Users.
Step 6
In the contents, click TACACS+.
Step 7
Enter the correct information.
Step 8
Click Apply.
Step 9
There are restrictions on using passwords when performing upgrades or applying patches. Do not include
the password as an argument in upgrade and patch commands. Use command syntax of this form:
patch ftp://user@host/full-patch/filename
Enter the password when prompted for it.
Supported RMON and RMON2 MIB Objects
Table 5
supervisor engine implements some objects from the RMON MIBs as specified in
supervisor engine RMON implementation is completely independent of the NAM implementation, and
no MIB objects are shared.
To collect etherStats from a physical interface on the switch, configure the etherStatTable on the
supervisor engine instead of on the NAM. The etherStats are then collected accurately on multiple
physical interfaces simultaneously.
If you are interested in the etherStats for a specific VLAN, configure the etherStatsTable on the NAM.
For the data source, use the ifIndex corresponding to the VLAN of interest.
Any alarmVariable configured on the supervisor engine must reference a MIB object on the supervisor
engine. An alarmVariable configured on the NAM must reference a MIB object on the NAM.
You cannot configure an alarmVariable on the NAM that references a MIB object on the supervisor
Note
engine or configure an alarmVariable on the supervisor engine that references a MIB object on the
NAM.
Table 5
Supervisor Engine Module and NAM RMON Support
Module
Object Identifier (OID) and Description
Supervisor
...mib-2(1).rmon(16).statistics(1).etherStatsTable(1)...mib-2(1).rm
Engine
on(16).statistics(1).tokenRingMLStatsTable(2)
...mib-2(1).rmon(16).statistics(1).tokenRingPStatsTable(3)
Counters for packets, octets, broadcasts, errors, etc.
Supervisor
...mib-2(1).rmon(16).history(2).historyControlTable(1)
Engine
...mib-2(1).rmon(16).history(2).etherHistoryTable(2)
...mib-2(1).rmon(16).history(2).tokenRingMLHistoryTable(3)
...mib-2(1).rmon(16).history(2).tokenRingPHistoryTable(4)
Periodically samples and saves statistics group counters for later
retrieval.
Catalyst 6000 Family Network Analysis Module Installation and Configuration Note
64
lists the RMON and RMON2 MIB objects supported by the supervisor engine and the NAM. The
Table
Source
RFC 1757 (RMON-MIB)
RFC 1513 (TOKEN-RING-RMON MIB)
RFC 1513 (TOKEN-RING-RMON MIB)
RFC 1757 (RMON-MIB)
RFC 1757 (RMON-MIB)
RFC 1513 (TOKEN-RING-RMON MIB)
RFC 1513 (TOKEN-RING-RMON MIB)
5. The
78-10406-05

Advertisement

Table of Contents
loading

Table of Contents