Installing Fda/Nsf Required Thermometer - Hussmann REACH-IN Installation & Operation Manual

INSTALLING FDA/NSF REQUIRED THERMOMETER

The following pages provide the same information that ships with the thermometer. This requirement does not apply to display refrigerators
intended for bulk produce (refer to Page 1-1). Please note that the tape cannot be exposed after installation.
This is an NSF-7 &
This is an NSF-7 &
This is an NSF-7 &
US FDA Food Code US FDA Food Code
US FDA Food Code
Required
Required
Required
Thermometer
Thermometer
Thermometer
Thermometer — Hussmann Part TM.4911251
Thermometer – Hussmann Part TM.4911251
Thermometer — Hussmann Part TM.4911251
Hussmann Corporation • 12999 St. Charles Rock Road • Bridgeton, MO 63044-2483
Hussmann Corporation • 12999 St. Charles Rock Road • Bridgeton, MO 63044-2483
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900E • www.hussmann.com
Hussmann Corporation • 12999 St. Charles Rock Road • Bridgeton, MO 63044-2483
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900E • www.hussmann.com
© 2007 Hussmann Corporation
© 2007 Hussmann Corporation
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
© 2007 Hussmann Corporation
Double Stick Tape
Flexible Plastic
Fits in Price Tag
Moldings
Hussmann P/N 0429971_C
Hussmann P/N 0429971_C
Hussmann P/N 0429971_C
HUSSMANN CORPORATION • U.S. & CANADA 1-800-922-1919 • BRIDGETON, MO 63044-2483 • MEXICO 1-800-890-2900 • WWW.HUSSMANN.COM • PN 3053328_H
Suggested Mounting Locations in
Single Deck Glass Front Impact
Merchandisers
– Inside
End Panel
– Shelf
Price Tag
Molding
– Return Air Grille
Suggested Mounting Locations
in Multi-deck Merchandisers
10/2007
10/2007
10/2007
Important – Please read!
– Acrylic
Package Guard,
Facing Out
Food and Drug Administration (US FDA) Food Code [ http://www.fda.gov/ ]
National Sanitation Foundation (NSF / ANSI) Standard 7 [ http://www.nsf.org/ ]
Each installation will be different
depending on how the unit is
stocked, shopping patterns in the
department and ambient conditions
of the store. The suggested loca-
tions provided herein are possible
locations. It is the responsibility of
the purchaser / user to determine
the location within the food storage
area of the unit that best meets the
code requirements above.
DO NOT DESTROY
4-5
This thermometer is provided in response to United States
and
The thermometer may need to be
moved several times to find the
warmest location. Mounting options
include flexible plastic for price tag
molding application, magnet
applied to back of flexible plastic for
steel end wall, and double stick
tape. Tape must not be exposed
after installation.
Questions about either code should
be addressed to local agencies or
other appropriate officials.
Keep with merchandiser
or give to store manager.
.