Table of Contents
Advertisement
5 - ADJUSTMENTS AND SETTING-UP
EN
5.3
SET-UP ACCORDING TO THE BAR TO BE MACHINED
According to the "new" bar diameter, a few or several operations must be carried out based on
the diameter of the previously machined bar.
Table 1. shows the max. and min. suitable diameters for bushing correct operation, table 2.
shows the available guide channel diameters with the corresponding range of bar pushers to be
mounted and the range of diameters of the bars to be machined.
Bushing adjustment according to the bar to be machined.
_Table1. Diameters of V-shaped bushings for SMART 316
_To machine shaped bars (i.e. squared or hexagonal bars), please ask IEMCA for half-
rounded bushings of the suitable diameter.
MODEL
BAR DIAMETER
MIN
SMART
3
316
8
BUSHINGS
MAX
16
16
5 - Pag. 4 / 18
SMART316
TYPE OF
V
V
Advertisement
Table of Contents
