Devices For Cam Lathes - Foreword; Cam Box - Description; Camshaft Release Device - Description - IEMCA SMART 316 Manual For Use And Maintenance

2 - TECHNICAL INFORMATION
2.9

DEVICES FOR CAM LATHES - FOREWORD

This feeder has been designed and manufactured to be coupled to cam lathes too.
To do this, special devices are available which are listed and then described below:

2.9.1 Cam box - Description

2.9.2 Camshaft release device - Description

2.9.1 Cam box - Description
Used to synchronize the feeder and cam lathe
movements. The cams located in the box A are
connected to the lathe camshaft B.
2 - Pag. 19 / 20
SMART316
EN