Parts Installation; Adjustable Legs - Zedbed CUSTOM-Z Manual

PARTS INSTALLATION

ADJUSTABLE LEGS

For: Z-Active, Z-Move, Advanced & Advanced WH
1. Place your adjustable bed face down on the floor, to
access the underside of the bed.
2. Select the desired height for the adjustable legs. You
have a choice of three (3) different heights to distance
your bed from the ground:
»
2¼'' : Attach parts "A" and "B"
» 6¼'' : Attach parts "A" and "C"
»
8¼'' : Attach parts "A", "B" and "C"
*Attention, part "A" must always be present.
A B C
3. Screw the adjustable legs into the threaded holes
provided for this purpose on the underside of the bed.
Make sure there is no space between the leg pieces
or between the adjustable leg and the adjustable bed.
4. Flip the adjustable bed back on its feet, making sure
to lift the bed up when handling. The manoeuvre must
be done by two people to avoid injury or breaking the
adjustable bed.
IMPORTANT !
DON'T DO THIS :
The adjustable bed should
not be supported by the legs
during manoeuvres.
17