Required components/tools:
1x Alcove side trim assembly
●
●
Install the side trims
Note: Four (4) dual-lock strips are pre-installed along each side trim.
Peel off the liners from the dual-lock strips. (A)
1
A
Position the trim on the throat with an angle. (B)
2
B
@3
Slide the trim behind the lower hinge (C), then the top
3
hinge (D). Hold the same angle when sliding the trim.
Reveal dual-lock adhesive
B
INSTALL CABINET TRIMS
D
C
Slide trim in behind lower hinge, then top hinge
Slot trim in behind top hinge pocket (E), then press (F)
4
adhesive to cavity ensuring trim is also tight against
appliance inner face.
Note: Press firmly on the dual-lock
strip locations to ensure the side
trims are securely attached.
F
Slot trim in behind hinge pocket, then press adhesive to cavity
ensuring trim is also tight against fridge inner face.
E
37