Table of Contents
Advertisement
Required components/tools:
Ruler
●
●
1x Barbed plug
●
●
Positioning and aligning the second appliance inside the cabinetry
A
1
Roll the second appliance into the cabinetry side by side with the first appliance. (A)
Before rolling the appliance, insert a barbed plug into a large hole on the cabinetry side of
2
the second appliance to protect the inside of the cabinetry from being damaged by screws
on the side of the appliance (B).
3
Continue rolling the appliance into the cabinetry until the anti-tip bracket overlaps
[minimum 7 1/8" (180mm)] the back top surface of the appliance. (Refer to 'Attach the anti-
tip bracket').
Check the clearance between the floor and the feet. Ensure the rollers of the appliance can
4
roll freely on the floor.
!6
DUAL INSTALLATION
5
Align the top cap of the second appliance flush with the central spacer and top cap of
first appliance (C).
B
Mark the step (D) of each alignment gauge based on the thickness of the door panel to be
6
installed to the door.
7
Align the marked steps of the gauges flush with the edges of the cabinetry side walls.
– Place a ruler on the steps of the alignment gauges to check if they are in line (E)
relative to the thickness of the door panel.
Check if the gaps between appliance and cabinetry side wall are even.
8
D
E
C
27
Advertisement
Table of Contents
