More Information - Cisco Catalyst Express 500 Getting Started Manual

Chapter 1 Getting Started Guide

More Information

How to Access the Device Manager
OL-9340-01
This section includes information about the device manager, Cisco Network
Assistant, and troubleshooting.
The simplest way to configure, manage, and monitor the switch is by using the
device manager. You can access the device manager from anywhere in your
network through a web browser. Follow these steps:
1. Set up and install the switch in your network, and connect devices as
described in this guide.
2. Launch a web browser on your PC.
Enter the switch IP address (the address that you assigned in
3.
web browser, and press Enter. The device manager page appears.
To end the session, close your browser window.
4.
Getting Started Guide for the Catalyst Express 500 Switches
More Information
Step 8) in the
1-13