Table of Contents
Advertisement
Drain hose
Drain hose
support (1)
joiner (1)
Phillips
38 mm
16 mm
bottom fixing
screws (7)
screws & metal
washers (2)
If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 3.6 m.
The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our local website listed at the end of this document.
Dishdrawer™ installation overview
This video provides an overview of what is needed to install a DishDrawer™. It is intended as an overview only of the installation process and is not intended to be used
as a guide on how to install a DishDrawer™ yourself. https://vimeo.com/325297597
2
PARTS SUPPLIED
Wire clip (1)
(for securing
Drain hose joiner)
Rubber washer
Moisture protection
for inlet hose (1)
tape (1)
(comes already
(to prevent moisture
fitted)
damage to cabinetry)
Clamp (1)
Side mounting
(for securing
bracket kit
Drain hose joiner)
(A and B) (2)
OPTIONAL
Top
mounting
brackets (2)
OPTIONAL
3
Advertisement
Table of Contents
