Table of Contents
Advertisement
!0
Using a small Philips screwdriver,
screw through the trim moulding, securing
the side mounting bracket to the cabinetry.
Do not damage the rubber trimseal.
A
-
SECURE TO THE CABINETRY ON THE SIDES
2
Repeat for all four brackets.
1
Open the drawer halfway.
Using a flat bladed screwdriver,
prise the grey rubber plug out of
the trim moulding.
3
Replace the grey rubber plug back
into the trim moulding and ensure
the trim seal is facing forward.
9
Advertisement
Table of Contents
