Table of Contents
Advertisement
PROBLEM
Dryer is not
draining.
Clothes getting
too hot or
damaged.
Dryer is beeping,
displaying
unfamiliar light
patterns and/ or
a message on the
digital display.
Small puddle of
water coming
from under the
machine.
TROUBLESHOOTING
POSSIBLE CAUSES
Drain hose not connected to
the water tank.
Water tank not in place
correctly.
Drain hose or drain blocked
or damaged.
Cycle selected not
appropriated for the load.
Items removed from dryer
before the end of cycle cool
down had finished.
Dryer is experiencing a fault.
Water tank not correctly in
place.
Water tank may need to be
emptied.
Water tank may be
damaged.
Drain hose may not be
attached properly at the
machine end.
Drain hose could be
damaged.
Drain hose has slipped out
of the drain.
Drain may be blocked.
Dryer door not closing
properly, affecting the seal.
WHAT TO DO
Ensure the drain hose is connected
correctly (refer to page 8).
Ensure water tank is properly in
place.
Check drain hose (if connected) and
drain for blockages or damage.
Ensure the cycle selected is
appropriate for items in the load.
Refer to pages 15 and 18.
Removing items before cool down
may damage clothing if it is not
spread out and exposed to air to
cool once removed from the dryer.
Try turning the dryer off and waiting
30 seconds before turning it back
on. Refer to pages 25 and 26.
Ensure the water tank is correctly in
place.
Empty the water tank.
Check the water tank for any signs
of damage.
Ensure the drain hose is attached
properly. Refer to page 8.
Check the drain hose for damage.
Ensure the drain hose is securely
fixed in place. Sometimes drain
hoses can move or get displaced,
which may lead to water draining
onto the floor.
Check the drain for any blockages.
Ensure the dryer door is closed
properly and there is nothing
obstructing the door opening.
29
Advertisement
Table of Contents
