Ec Declaration Of Incorporation - DITEC SPRINT Technical Manual

EC Declaration of Incorporation

We:
ASSA ABLOY Entrance Systems AB
Lodjursgatan 10
SE-261 44 Landskrona
Sweden
Declare under our sole responsibility that the type of equipment with name:
Ditec SPRINTV, Ditec SPRINTP, Ditec SPRINTPN, Ditec SPRINTL - swing door operators
Comply with the following directives and their amendments:
2006/42/EC
2014/30/EU
2011/65/EU
2015/863/EU
Harmonized European standards that have been applied:
EN 16005:2012
EN 60335-1:2002 + A11:2004 + A1:2004 + A12:2006 + A2:2006 + EC:2007 + A13:2008 + A14:2010 + A15:2011
EN60335-2-103:2005-07 +A11:2009-07
EN 61000-6-3:2007 + A1:2011
EN 61000-6-2:2005
EN 55014-1:2006 + A1:2009 + A2:2011
EN ISO 13849-1:2006
The manufacturing process ensures the compliance of the equipment with the technical file.
The equipment must not be used until the final installed automatic entrance system has been
declared in compliance with the Machinery Directive 2006/42/EC.
Responsible for technical file:
Matteo Fino
BSP Ind channel & Gate Automation
Ditec S.p.A.
Largo U. Boccioni, 1
21040 Origgio (VA)
Italy
Signed for and on behalf of ASSA ABLOY Entrance Systems AB by:
Place
Origgio 2022-06-28
Machinery Directive (MD) for the following essential health and safety
requirements: 1.1.2, 1.1.3, 1.2.1, 1.2.2, 1.2.3, 1.2.4.2, 1.2.6, 1.3.9, 1.4.3, 1.7.2,
1.7.3, 1.7.4, 1.7.4.1, 1.7.4.2.
Electromagnetic Compatibility Directive (EMCD)
Restriction of hazardous substances (RoHS 2)
Restriction of hazardous substances (RoHS 2 Amendment)
Date
Matteo Fino
Signature
Head of Ind channel & Gate Automation
5
Position
© ASSA ABLOY, All rights reserved