Declaration Of Incorporation Of Partly Completed Machinery - DITEC DAS200TRF Technical Manual
Sliding doors automation
Hide thumbs
Also See for DAS200TRF:
- Assembly handbook (34 pages) ,
- Original instructions manual (70 pages)
Table of Contents
Advertisement
Declaration of incorporation of partly completed
machinery
We:
Entrematic Group AB
Lodjursgatan 10
SE-261 44 Landskrona
Sweden
declare under our responsibility that the following types of equipment:
Ditec DAS200T, Ditec DAS200TRF, Ditec DAS200TRG
comply with the following directives:
2014/30/EU
2006/42/EC
2011/65/EU
Technical documentation for safe integration supplied.
Harmonised European standards which have been applied:
EN 60335 -1:2012+A13:2017
EN 60335-2-103:2015
Other standards or technical specifications, which have been applied:
IEC 60335-1: 2010 ed.5
DIN 18650-1:2010
EC type examination or certificate issued by a notified or competent body (for full address please
contact Entrematic Group AB) concerning the equipment:
B 085479 013( Ditec DAS200T, Ditec DAS200TRG)
B 085479 012( Ditec DAS200TRF)
The production process aims to guarantee that the equipment complies with the technical
documentation.
The production process is regularly assessed by an independent body.
The equipment must not be put into service until the final door system installed has been
declared compliant with the Machinery Directive 2006/42/EC by the installer.
Person in charge of technical data sheet:
Matteo Fino
Entrematic Group AB
Lodjursgatan 10
SE-261 44 Landskrona
Sweden
Place
Landskrona
EN
Electromagnetic Compatibility Directive (EMCD)
Machinery Directive (MD) for the following essential health and safety
requirements: 1.1.2, 1.2.1, 1.2.2, 1.2.3, 1.2.4.2, 1.2.6, 1.3.9, 1.4.3, 1.7.2, 1.7.4,
1.7.4.1, 1.7.4.2
on the restriction of the use of certain hazardous substances in electrical
and electronic equipment (RoHS)
EN ISO 13849 -1:2015
EN 16005:2012/AC:2015
IEC 60335-2-103:2006+A1:2010
DIN 18650-2:2010
E-mail: matteo.fino@entrematic.com
Date
Signature
2020-10-07
Matteo Fino
Matteo Fino
EN 61000 -6-2:2005
EN 61000 -6-3:2007+A1:2011
Position
no
no
no
no
no
no
no
n
no
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Entrance Automation President
4
AutSchR: 1997
Advertisement
Chapters
Table of Contents
