Banner XS26-2 Manual

XS26-2/SC26-2 Base Safety Controllers
Datasheet
Important: For complete technical information about this product, including installation instructions, application requirements
and guidelines, technical specifications, and accessories, go to
manual, p/n 174868.
• Program in minutes with intuitive, easy-to-use configuration software
• Up to eight expansion I/O modules can be added as automation requirements grow or
change
• Choose from six expansion module models
• Expansion module models have a variety of safety inputs, solid-state safety outputs and
safety relay outputs
• Innovative live display feature and diagnostics allow for active monitoring of I/O on a PC
and assist in troubleshooting and commissioning
• Safety Controller and input modules allow safety inputs to be converted to status outputs
for efficient terminal use
• Ethernet-enabled models can be configured for up to 256 virtual status outputs
• Optional SC-XM2/3 external drive for fast swap and quick configuration without a PC
Note: Configuration software is required.
The software is available at http://www.bannerengineering.com/safetycontroller.
Features Diagram
Indicator LED's
Onboard Interface Push Buttons
Onboard Display
Responsibilities of Qualified Personnel
To access the Banner Safety Controller instruction manual (p/n 174868 ):
• Go to www.bannerengineering.com to download the manual in the language you require; or
• Call Banner at 1-888-373-6767 or call your local Banner Representative to request a manual
WARNING:
It is the responsibility of the Qualified Personnel to:
• Carefully read, understand, and follow the information in the XS/SC26-2 instruction manual
• Perform a risk assessment of the specific machine guarding application
• Determine what risk reduction measures are appropriate per the results of the risk assessment
• Properly install, configure, and then verify that the risk reduction measures are working as intended
• Periodically re-verify, as needed, that the risk reduction measures are working as intended
Failure to follow any of these responsibilities may potentially create a dangerous condition that could lead to serious injury or
death.
Original Document
175119 Rev. L
Ethernet Port
Wiring Terminals
www.bannerengineering.com
Model
XS26-2
XS26-2d
XS26-2e
XS26-2de
SC26-2
SC26-2d
SC26-2e
SC26-2de
10 August 2020
and search for the instruction
Features
Expandable
Expandable + Display
Expandable + Ethernet
Expandable + Display + Ethernet
Non-Expandable
Non-Expandable + Display
Non-Expandable + Ethernet
Non-Expandable + Display + Ethernet
Wiring Terminal
Row Designation
Expansion Port
Micro USB Port
175119