Table of Contents
Advertisement
1
A
2. Touch Panel Test
[How to activate the touch panel test mode]
Choose "Touch Panel Test" among the monitor test mode menu screen.
[Menu types in the mode]
The calibration test mode consists of the following menus.
Top menu
Outermost circumference inspection
Calibration inspection
B
Coordinate inspection
Calibration verification
Data initialization
[Operation specification]
Operational description
Selection cursor up movement
Selection cursor down movement
Return to test mode menu
Menu enter
[Description of the top menu]
C
[Display specification]
D
Conditions for lighting of the adjustment complete mark " * ".
Outermost circumference inspection :
In case the outermost circumference inspection has been completed normally.
Calibration inspection :
In case the calibration has been completed normally.
Conditions for the adjustment complete mark " * " to go out.
E
Outermost circumference inspection :
In case the outermost circumference inspection has never been performed.
In case the EEPROM initialization has been performed.
In case the adjustment value has been initialized.
Calibration inspection :
In case the calibration inspection has never been performed.
In case the EEPROM initialization has been performed.
In case the adjustment value has been initialized.
F
78
1
2
Remote controller key
2
8
1
5
AVH-P6300BT/XNUC
2
3
3
4
4
Advertisement
Table of Contents
