General Safety; Intended Use; Foreseeable Misuse - Mafell Z5Ec Operating/Safety Instructions Manual

3

General safety

Please read all safety instructions and directions. Failure to comply with the safety instructions and
directions can cause electric shock, fire and/or serious injuries. Please retain all safety instructions and
directions for future reference.

3.1 Intended use

The machine is designed exclusively for cutting solid wood and pressure-resistant wood-based panels, using
saw bands with hardened teeth.
The dimension of the saw bands used must be within the following range:
Saw band length
Saw band width
Saw band thickness max.

3.2 Foreseeable misuse

The machine is not intended for any other use than the intended use listed above.
The manufacturer is not liable for any damage resulting from such other use.
To use the machine as intended, comply with the operating, maintenance and repair conditions specified by
MAFELL.
Foreseeable misuse also includes:
- Tampering with, removing and/or bypassing safety devices of any kind.
- Operating the machine without safety devices.
- Non-observance of safety and warning instructions in the operating instructions.
- Removing the safety and warning labels from the machine.
- Operating the machine by unauthorized persons.
- Failure to follow prescribed maintenance and care instructions.
Never use:
- Cracked or warped saw bands.
- Saw bands thicker than 0.65 mm [0.03 in].
8
1752 mm [68.98 in] ±10 mm [0.39 in]
6 – 8 mm [0.24 - 0.32 in]
0.65 mm [0.03 in]
Z5Ec
02/2022