Part 4 Rep Counter Limit Switch Locations - Matrix ULTRA Owner's Manual

STEP 1 | REP COUNTER LIMIT SWITCH INSTRUCTIONS & NOTES
Assemble (3) sensors located
per machine chart shown below.
Thread zip ties through
holes to secure cables
Route wires in groove
If necessary, adjust the proximity of the magnet by sliding magnet holder closer to sensors.
Machine
Chest Press
Shoulder Press
Leg Extension
Seated Leg Curl
Leg Press
Lat Pulldown
Triceps Press
Seated Row
Bicep Curl
Hip Abduction
Hip Adduction
Pec Fly
Lateral Raise
Abdominal Crunch
Back Extension
Calf Extension
Prone Leg Curl
Rotary Torso
Glute
Sensor Locations (Sensor
"A" = Top, "B" = Middle, "C" =
Bottom)
A5, B9, C13
A4, B9, C12
A7, B10, C13
A7, B11, C15
A10, B11, C14
A2, B6, C12
A5, B9, C12
A2, B7, C13
A11, B12, C15
A8, B9, C13
A10, B11, C13
A5, B8, C12
A7, B8, C15
A10, B11, C13
A7, B8, C13
A9, B11, C15
A8, B9, C15
A11, B12, C15
A6, B11, C15
ASSEMBLY
PART 4: LIMIT SWITCH ASSEMBLY
I M PO RTA NT NOTI CE
PLEASE NOTE:
Be sure to remove the insulating
sheet when installing the
Rep Counter.
15