6. Recovering Back to Default Configuration
IP address has been changed or admin password has been forgotten –
To reset the IP address to the default IP address "192.168.0.100" and the
user password to factory default mode (default password is admin), press the
hardware-based reset button on the front panel for about 10 seconds. After
the device is rebooted, you can log in the management Web interface within the
same subnet of 192.168.0.xx and default password. Be noted that all the previous
setups will be disappeared after the factory default reset is made.
P1
P2
Alarm
Ring
R.O.
I/O
6
10GBASE-T
5
115200,N,8,1
4
3
2
2.5G
10G/1G
1
IGS-6325-5X1T
Figure 6-1: IGS-6325-5X1T Reset Button
2.5G
LNK
10G/1G
LNK
5G/100
LNK
Console
Reset Button
Reset
5
4
3
2
1
LNK/ACT
LNK/ACT
15