Technical Data; Electrical Version And Electrical Data; Water Connection; Drainage - Miele PWM 916 SD Installations Plan

en - PWM 916

Technical data

Electrical version and electrical data

Connection voltage
Frequency
Total amps.
Max. fuse (time delay fuse)
Mimimum circuit ampacity

Water connection

Models with detergent drawer (DD)
Permitted flow pressure
Maximum water intake rate
Cold-water connection
(to be provided on site, male thread according to DIN 44991, flat seal)
Optional cold-water connection for liquid dispensing
(to be provided on site, male thread according to DIN 44991, flat seal)
Optional hard-water connection, cold
(on-site external thread according to DIN 44991, flat seal)
Hot-water connection (≤ 158°F (70°C))
(on-site external thread according to DIN 44991, flat seal)
Length of water-inlet hoses supplied

Drainage

Maximum drain water temperature
Waste water connection (on machine)
Drain (on site)
Maximum drainage rate

Connection for equipotential bonding

Male thread
Toothed washers

Installation dimensions

Casing width (without add-on components)
Casing height (without add-on components)
Casing depth (without add-on components)
Overall machine width
Overall machine height
Overall machine depth
Minimum width of transport opening
Minimum distance between wall and front of machine
Door-opening diameter
Door-opening angle
16
208/240 V 3 Ph
145 psi (1000 kPa)
3 x ½" with ¾" thread connection
2 x ½" with ¾" thread connection (Optional)
1 x ½" with ¾" thread connection
Plastic pipe HT DN 70
Connection DN 70
36 1/4" (920 mm)
56 3/8" (1432 mm)
29 11/16" (754 mm)
36 3/8" (924 mm)
56 15/16" (1447 mm)
37 1/2" (953 mm)
40 3/16" (1020 mm)
50 3/8" (1280 mm)
16 5/16" (415 mm)
60 Hz
3 X 8.2 A
3 X 8.2 A
3 X 15 A
47.5 l/min
5' 1" (1.55 m)
203°F (95°C)
200 l/min
M10
M10
180°