Connecting Devices To The Monitor - PRESONUS Monitor Station V2 Owner's Manual

2
Getting Started
Quick Start Guide
2.1
2.1.2 Connecting Devices to the Monitor Station V2's Inputs 将设备连接到 Monitor Station V2
的 输入端
4. Turn on the Monitor Station V2's power by pressing the "|" symbol at the top of the
Power switch.
按下电源开关上方的 "|" 符号，打开 Monitor Station V2 的电源。
1. Zero the Monitor Station V2's front-panel Main Output Level knob, the Cue Output
knob, and the individual headphone Level knobs by turning them fully counter
clock wise.
将Monitor Station V2的前面板"Main Output Level"主输出电平旋钮、"Cue
Output" 旋钮和各个耳机电平旋钮逆时针方向完全旋转，使它们 "Zero" 归
零。
2. Connect your primary audio source (computer audio interface, mixer, or other
stereo source) to the balanced ¼"TRS ST1 L/R inputs on the back of your Monitor
Station V2.
3. If you have a secondary stereo audio source or cue audio source—such as other
interface outputs or the auxiliary outputs of your mixer—connect it to the
balanced ¼"TRS ST2 L/R inputs.
The Monitor Station V2 can accommodate a variety of analog
and digital input sources. Here's how to attach them.
Phone, personal music player, or other device with 1/8" stereo output. Connect
the output to the rear-panel1/8"Aux In jack using an unbalanced, stereo 1/8"cable.
(With a phone or personal music player, the headphone jack is its output.)
Monitor StationV2
Owner'sManual
5