Parking Brake Adjustment - Suzuki LT-Z400 Owner's Manual

Hide thumbs Also See for LT-Z400:
Table of Contents

Advertisement

PARKING BRAKE ADJUSTMENT

1. Park the vehicle on level ground.
Chock the front wheels. Lift the
rear end of the vehicle and place a
block under the swing arm.
2. Loosen the lock nut 1. Turn out
the adjuster 2.
3. Loosen the lock nut 4.
4. Turn the adjuster 3 so that cable
length A is 47 – 51 mm (1.9 – 2.0
in).
5. Tighten the lock nut 4.
6. Tighten the adjuster 2 until resis-
tance is felt, then loosen the
adjuster 1/8 – 1/4 turn.
7. Tighten the lock nut 1 while hold-
ing the adjuster in position.
8. Tighten the lock nut 1.
WARNING
Failure to properly adjust the park-
ing brake can be hazardous.
If the brake grabs or fails to lock
the wheels when engaged, you
may have an accident.
After adjusting the parking brake,
lift the rear wheels off the ground
and make sure they spin freely
with the brake released. Also
make sure the rear wheels are
locked when the parking brake is
set.
5-25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents