Black Box Usb Peripheral Server/5 Installation Manual page 5

5. Double click on the Concentrator or select the Concentrator and press the
Configure button in order to set the IP address, subnet mask, and Gateway.
6. Enter a Device Name that easily identifies the concentrator.
7. Enter the IP address and Subnet Mask. Contact your Network Administrator for IP
address assignment
8. Enter the Gateway for your network. In a network using subnets, the Gateway is
the router that forwards traffic to a destination outside of the subnet of the
Peripheral Server device.
9. For the changes to take effect you must click on the Update button to reset the
Concentrator.
Peripheral Server Installation Guide (Rev. A) – Page 3